SMOK GROOVE II in GUNMETAL GREY

$38.95 
SKU:  
Availability: Out Of Stock
Quantity: 0 pcs
Qty:  
Add To Wishlist

SmokTech re-indroduces the Groove with the Groove II. Everything you loved about the orginal Groove remains the same.

 SmokTech re-indroduces the Groove with the Groove II. Everything you loved about the orginal Groove remains the same. All the small screws that hold the device together are now flat instead of pointed, so you no longer have to worry about the battery getting punctured if you drop it. The battery has also been reinforced, making it very difficult to ever come loose or rattle.

This is a variable volt, variable watt mod. The Groove adjusts from 3.0 to 6.0 Volts in .1 volt increments or 3.0 to 15 Watts in .5 Watt increments and has a cool backlit OLED display.  The Groove has a maximum output of 5 Amps.

 The Groove can read your output voltage, battery voltage and cartomizer atomizer resistance.  This mod does it all. 

The 510 connector will accept any 510 tank, atomizer or cartomizer and has a channel around the 510 connector so you can use 510 eGo style cartomizers or tanks.  This device does not have eGo threading, and requires an adapter for use with certain clearomizers and tanks that have only the large eGo threading. With the power of varaible volt you can use almost any 510 tank or carto you have.  

There are ample vent holes in the side of this APV for added safety.

The groove has an internal 3.7V, 3800mAh Li-polymer battery that lasts far beyond most other batteries.  Included with the APV are a mini USB to USB cable for charging with a computer and a USB to AC adapter for charging with a wall outlet. The Groove cannot be used while it is being recharged.

The button on the top of the Groove can turn the device on and off with 5 quick pushes.  Read the resistance of your cartomizer or tank by holding the "+" button for 3 seconds.  Easily adjust Voltage or Wattage by using the "+" or "-" button.  Hold down the "+" and "-" buttons together for 3 seconds to switch between Voltage and Wattage.  Output Voltage or Wattage is displayed when you press down the top button.  Battery Voltage is displayed by pressing the "-" button for 3 seconds.

The Groove only needs a 510 style tank, cartomizer, CE4 and some e-liquid and it is a complete ready to go unit with nothing else to buy!

There are no reviews for this product.


Write Your Own Reviews

Please login to write review.